Life is full of fun and enjoyable times, but it’s also full of responsibilities too. As much as you may enjoy your leisure and downtime, you still need to go to work, or study, do the shopping, pay bills, e-file your tax return and all that other boring stuff that you’d probably rather not do. And let’s not even begin about the chores. Living in a neat and tidy house means less stress, but it also means some hard work as you have to do regular cleaning, tidying and sorting to keep it all ship shape. And if you have carpets, you’re going to want to keep them clean. Carpets can trap dirt and grime quite easily, resulting in unpleasant stains. So in this helpful article, we’re going to check out the shampoo sheen and take you through a step by step guide to carpet washers. Read on to discover all the secrets!
Step One – Vacuum
Before breaking out the carpet washer, you’re going to want to give your carpets a thorough vacuuming. It is best to use a reliable, decent vacuum with a strong suction action for this task. Spend a solid amount of time on this step, because you want to ensure all loose dirt, debris, dust and other nasties are sucked up before you begin to wash your carpets. Use the narrow nozzle to get into the corners, nooks and crannies as well. Leave no stone unturned in your quest for pristine carpets.
Step Two – Move Your Furniture
You want to ensure that you clean all the carpet in your home. This might mean some heavy lifting as you’ll need to move all your furniture away so you can get to it. Beds, wardrobes, cupboards, bedside tables and dressers – they all need to move. If possible, move all furniture items sitting in carpeted areas into a room in your house that doesn’t have carpet. That way you can give your carpets the care they deserve. Vacuum in the vacant spots too.
Step Three – Treat Individual Stains
If you have particularly stubborn spots or stains on your carpet, use a carpet stain remover to treat them before washing. The directions on the bottle will tell you if you leave the stain remover on or blot it up with some paper towels.
Step Four – Use the Carpet Washer
The next step is to use the carpet washer that you’ve either hired or purchased. Make sure that you follow all the instructions carefully because if you miss a step you might either damage the tool or have to begin all over again. Start in a corner of a room and work your way methodically through the room. You might want to clean in a grid, using straight lines, so you don’t miss anything. Go slowly. You don’t want to treat the washer like a vacuum, because it takes longer to work. The slower you work, the deeper the clean. It will take some time but the results will be worth it. Keep an ear out for a distinct change in the sound of the motor, when this occurs it means the tank is full. Empty the tank and resume the task. You may go through several tanks until you’ve finished every carpeted room in your house.
A Carpet Cleaning Conclusion
Break out the vacuum first, and ensure all dirt, debris and dust are removed before you begin. Next, move all the furniture and vacuum in the vacant spots. Then, treat each stain. Finally, it’s time to operate the carpet washer, paying careful attention to the instructions. Enjoy your clean carpets.
photos via homeyohmy.com
